Optically Clear Adhesive Film (OCA) - MCS62
MCS62 Optically Clear Adhesive Film
Substrate-free OCA roll film for optical film lamination - available from
1 meter
MCS62 is a high-transparency optically clear adhesive (OCA) film designed for bonding optical films and transparent optical parts.
It is composed only of an adhesive layer with no PET carrier substrate, making it suitable for lamination of polarizer film, waveplate film and other functional optical films.
Related products: OCA / Cold Filter category | M3D49 OCA film | Optical film lineup
Substrate-free OCA
620 mm width
0.025 mm thickness
Available from 1 meter
|
What MCS62 is used forMCS62 is used when a clear adhesive layer is needed between optical films or between an optical film and a transparent substrate. Because it has no base film, it helps keep the laminated structure thin and transparent while avoiding optical effects caused by an additional carrier substrate. Typical Applications
|
MCS62 – Substrate-Free Optically Clear Adhesive Film
|
■ High optical transparency for clear lamination ■ Substrate-free adhesive layer with no base film ■ Designed for bonding optical functional films ■ Suitable for polarizer film, retarder film and display-related parts ■ Designed to minimize edge overhang and contamination during lamination ■ Tested for heat, humidity and thermal-cycle durability under specified conditions |
| Item Code | Size | Order Length | Unit Price |
| MCS62 | Width 620 mm t = 0.025 mm Roll type |
1 - 9 m | $ 33 / m |
| 10 - 29 m | $ 30 / m | ||
| 30 m or more | $ 27 / m |
Recommended use cases
MCS62 is suitable for optical film lamination where adhesive clarity and thin construction are important. It can be used for bonding optical functional films for display-related products and transparent optical assemblies.
- Optical functional film lamination for flat-panel displays
- Bonding of polarizer film, retarder film and similar optical films
- Glass or optical plastic film bonding
- Prototype evaluation of transparent adhesive structures
Sample Evaluation Recommended
Adhesive performance may vary depending on the substrate, optical film, surface treatment, cleaning condition and lamination process. Please evaluate MCS62 with your actual materials before production use.
Adhesive performance may vary depending on the substrate, optical film, surface treatment, cleaning condition and lamination process. Please evaluate MCS62 with your actual materials before production use.
Need MCS62 for optical film lamination?
Please confirm the required length, substrate, film type and application
— send us an inquiry.
Please confirm the required length, substrate, film type and application
— send us an inquiry.
Specification of MCS62 OCA Film |
||
Size | ||
| Width | mm | 620 |
| Length (Max.) | m | 100 |
| Thickness | mm | 0.025 |
Optical Performance | ||
| Total light transmittance | % | 92 |
| Haze | % | 0.4 |
Durability Test Conditions | ||
| Heat / humidity / thermal cycle |
85℃ x 200 h 85℃ x 85% RH x 200 h 60℃ x 95% RH x 200 h 85℃ / -40℃ x 30 min x 200 cycles |
No floating, peeling or bubbling of film |
| Test sample | 1 mm PMMA (MR200) + PET layer, 50 x 100 mm | |
Safety Notice / Compatibility Notice
The values above are measured values and are not guaranteed values. They do not guarantee compatibility with every material, film, substrate, device or usage example described on this page. Please perform compatibility testing with the actual target material and bonding conditions before using MCS62 in any system, equipment or production process.
The values above are measured values and are not guaranteed values. They do not guarantee compatibility with every material, film, substrate, device or usage example described on this page. Please perform compatibility testing with the actual target material and bonding conditions before using MCS62 in any system, equipment or production process.
FAQ – MCS62 Optically Clear Adhesive Film
Q. What is MCS62?
A. MCS62 is a substrate-free optically clear adhesive film used for bonding optical films and transparent substrates.
Q. Does MCS62 have a base film?
A. No. MCS62 is composed only of an adhesive layer and does not have a PET carrier substrate.
Q. Can MCS62 be used with polarizer film or waveplate film?
A. Yes. It is suitable for optical film lamination, including polarizer and retarder films. However, final performance should be checked with the actual film, substrate and lamination process.
Q. What is the minimum order quantity?
A. MCS62 is available from 1 meter. Bulk pricing is available for longer lengths.
See also: OCA / Cold Filter category | M3D49 OCA film | Optical film lineup