• Polarizer film
    • Polarizer 3D Glass
  • AR and AGAR film
  • AR/AGAR film sheet type
  • AR film roll type
  • AR film roll type
  • AR/AGAR film sheet type low tack
  • AR acrylic cast type
  • AR acrylic extrude type
  • AR acrylic cast type
  • mirrorless camera set
  • how to apply AR film
  • AR film mechanism
  • cold filter adhesive film
  • inquiry form
  • order form


@@Anti-Reflective Film - Roll 1220/1500 mm width (for outdoor)


@UVAR12SG-RL / UVAR15SG-RL

Weather-resistant AR film for exterior use.
Ideal for store display window, electronic traffic sign
on freeways, or for cover glass on platform displays, etc.
Two large roll sizes, 1,220 and 1,500mm wide,
are available from 2m order.
 

Anti-Reflective film (AR film)

 ¡ Unprecedentedly high weather resistance
 ¡ UV Cut - Prevents fading of products and paintings due to ultraviolet rays.
 ¡ Wide roll type film - 1220 & 1500 mm  width. Available from minimum 2 m length order.
 

Anti-Reflective film (AR film)
How to apply
How AR works
 
 Data Sheet

š NOTICE 1 : UVAR12SG/15SG-RL cannot be applied to resin/acrylic products.
@When applied to acrylic or other resin products, gas may be generated from the object
@and bubbles may form between the film and the object. Please refer to the following link for details.
@Caution when applying to plastic products.


 š NOTICE 2 : No Protective Layer on surface (AR) Side
@There is no surface protection film applied because it is a construction-use exterior film.
@Please use a special too (such as squeegee) when applying, and be very careful not to
@damage the surface with fingerprints or scratches.


  @Price

Item Code Size Unit Price
UVAR12SG-RL
(1220 mm width)
2 - 4 meter $ 192 / meter
5 - 9 meter $ 179 / meter
10 - 29 meter $ 161 / meter
30 -  meter $ 149 / meter
A4 size (25 x 30cm) sample $ 25

Item Code Size Unit Price
UVAR15SG-RL
(1500 mm width)
2 - 4 meter $ 231 / meter
5 - 9 meter $ 215 / meter
10 - 29 meter $ 194 / meter
30 -  meter $ 181 / meter
A4 size (25 x 30cm) sample $ 25

š AR film should be applied to both the front and back of the glass for full effect.
The reflectance of a transparent object such as glass is about the same on the front and back,
4-5% on one side and 10% total on both sides. AR film reduces this to about 0.5% on each side,
so if you put it on both sides, you can reduce it to 1% (one tenth), but if you only put it on one side, 5.5% (about half) remains. Although one side is also effective, it is best to apply it on both sides.
Front reflect Back reflect Total reflect
No AR film 5.0 % + 5.0 % = 10.0 %
AR film on front only 0.5 % + 5.0 % = 5.5 %
AR film on both side 0.5 % + 0.5 % = 1.0 %
Not recommended for use with Multi-layered glass (double/triple glazing glass)
In the case of double-glazing, such as paired glass with two or more layers for the purpose of
heat insulation or soundproofing, it is necessary to apply AR film on all surfaces
(four surfaces in the case of double-glazing). This is not practical and we do not recommend.


  @Specification

Specification & Inspection Criteria
Optical Characteristic (*3mm glass is a general value for comparison.)
 Item Unit Double side application 3mm Glass
 Visible light
 (380-780nm)
Transmittance % 96 90
Reflectance % 1.3 8
 UV Transmittance (300-380nm) % Less than 1.0 74
 Sun light Transmittance % 85 86.1
Reflectance % 3 8.1
Absorption % 12 5.3
 Shielding coefficient 1 1
 Thermal conductivity W/(m  W/(m2K) 6.0 6.0
 Solar heat acquisition %   88 88 
Physical Characteristics
 Item   Anti-Reflective film (AR film)
Materia  PET
Effective thickness  78ƒÊm
Width (mm) 1220/1500mm
Tensile strength (%) MD  146
Tensile strength (N/25mm) MD  190
Adhesive strength (N/25mm)  13.0
  * Actual measurement value, and not guaranteed values.
Measurement condition;
Double-sided application of UVAR on 3mm float glass (In accordance with JIS A 5759)

¡ Shielding Coefficient:
Relative value for the amount of heat entering a room from solar radiation. When 3mm float glass (with no AR film) is set at 1.00, this is the value when the film is attached to the glass.

¡ Thermal Conductivity: It indicates the amount of heat per square meter that can be
conducted in one hour when the temperature difference between the two sides is 1‹C.

¡ Solar Heat Acquisition: It indicates the amount of heat that flows into a room when the
film is applied to 3mm float glass. The smaller this value is, the less solar heat flows into the room.

Remedies and Limitations
Should any product fail to perform as warranted or for any other claims arising from the
purchase of products from us, our liability and your remedy are strictly limited to the
purchase price or replacement, at our sole option, of the product sold.