Top
| Permanent adhesive▼ Low-tack adhesive ▼ |
| Got claims from neighbors for light reflection off of your large window ? Unable to see through inside the show window at certain time of the day ? In such cases, AR film is perfect solution. Apply AR Film on both side of window and eliminate the reflection donw to one-tenth ! |
| MTAR - AR (anti-reflective) Film - Permanent Adhesive Type |
 |
t = 74 μm (with no protective layer) |
|
|
| Item Code | Size | Unit Price | |
| MTAR-1 | 1000 x 485 mm (effective area 980 x 480 mm) |
convert to inches |
$ 141 |
| MTAR-3 | 485 x 330 mm (effective area 480 x 325 mm) |
convert to inches |
$ 52 |
| * Small free sample piece available. Please use Inquire form for request. * Bulk price available for more than 10 unit order |
| JAR - AR (anti-reflective) Film - Low-tack Adhesive Type |
 |
With low-tack silicone adhesive, it can easily be removed and reapplied. |
|
|
| Item Code | Size | Unit Price | |
| JAR-8 | 850 x 500 mm (effective area 830 x 480mm) |
convert to inches |
$ 162 |
| JAR-4 | 425 x 500 mm (effective area 415 x 480mm) |
convert to inches |
$ 84 |
| * Small free sample piece available. Please use Inquire form for request. * Bulk price available for more than 10 unit order |
| ★ Apply AR film on both sides for full effect Light reflects both on the front and the reverse side of glass surface. Reflections are approx 4-5% for each side, and total reflection sum up to approx 10%. AR film reduces reflection down to approx 0.5% on each side and therefore applying film on both side would reduce total reflection down to less than 1% (1/10). * Applying on only one side leaves out 5.5% reflection and so please apply on both side. |
||||||||||||||||||||||||
|
||||||||||||||||||||||||
| Notice : Multi-layered glass (double/triple glazing glass) requires film to be applied
on every surface. For instances, double glazing glass requires AR film
to be applied on all 4 surfaces. It is not practical and we do not recommend using AR film on these glass |
 |
 |
