Top
MCPR / MCPL |
CP125R / CP125L |
|
High Performance Circular polarizing film
Available from single sheet (No MOQ required)
Circular polarization for 3D imaging, machine vision, optics, strain inspection
and anti-reflection systems. Industrial quality circular polarizer film with high extinction performance. Both right-hand and left-hand circular polarizer types are available. |
■ Single transmittance ≈ 43%
■ Neutral gray color, high-contrast circular polarizer
■ Retardation: 140 nm
■ Material: polarizer PVA / substrate TAC
■ Ideal for 3D imaging, strain inspection, display anti-reflector and other optical applications
 |
 |
| Item Code | Type | Size | Spec | Unit Price |
| MCPR-AL | Right | 100 x 48 cm | t=0.30 mm | * Seam | $ 238 |
| MCPL-AL | Left | 100 x 48 cm | t=0.30 mm | * Seam | $ 238 |
| MCPR-1 | Right | 40 x 40 cm | t=0.30 mm | Seamless | $ 179 |
| MCPL-1 | Left | 40 x 40 cm | t=0.30 mm | Seamless | $ 179 |
| MCPR-2 | Right | 40 x 20 cm | t=0.30 mm | Seamless | $ 99 |
| MCPL-2 | Left | 40 x 20 cm | t=0.30 mm | Seamless | $ 99 |
| MCPR-4 | Right | 20 x 20 cm | t=0.30 mm | Seamless | $ 66 |
| MCPL-4 | Left | 20 x 20 cm | t=0.30 mm | Seamless | $ 66 |
* Large-size sheets (e.g., MCPR-AL / MCPL-AL) may include
seams (approx. every 800 mm) due to manufacturing process.
* Free sample (small piece) available upon request.
* Bulk pricing available for orders over 10 units.
■ High transmittance, high polarization circular polarizer
■ Retardation: 125 nm
■ Widely used for polarizing 3D systems
■ Budget-price type ideal for 3D glasses and 3D projector applications
 |
 |
| Item Code | Type | Size | Spec | Unit Price |
| CP125R-1 | Right | 45 x 25 cm | t=0.30 mm | Seamless | $ 89 |
| CP125L-1 | Left | 45 x 25 cm | t=0.30 mm | Seamless | $ 89 |
| CP125R-2 | Right | 22 x 25 cm | t=0.30 mm | Seamless | $ 48 |
| CP125L-2 | Left | 22 x 25 cm | t=0.30 mm | Seamless | $ 48 |
* Free sample (small piece) available upon request.
* Bulk pricing available for orders over 10 units.
Q. What is the difference between linear polarizer and circular polarizer film?
A. Circular polarizer film combines a linear polarizer layer and a retardation layer,
enabling circularly polarized light. It is commonly used in 3D optics, imaging systems,
and optical assemblies where polarization direction control is required.
Q. What is the difference between right and left circular polarizer film?
A. The difference is the handedness of the circular polarization.
Depending on the optical system, projector, glasses, or analyzer configuration,
either right-hand or left-hand circular polarizer may be required.
Q. What is the difference between MCPR / MCPL and CP125R / CP125L?
A. MCPR / MCPL is a higher-contrast circular polarizer film with 140 nm retardation,
while CP125R / CP125L is a cost-effective circular polarizer film with 125 nm retardation
often used for polarizing 3D systems.
Q. Are right-hand and left-hand circular polarizer films both available in sheet form?
A. Yes. Both right-hand and left-hand circular polarizer film types are available in sheet sizes
for prototyping, evaluation, and industrial use.
Q. Can I buy only one sheet?
A. Yes. This page is structured to emphasize single-sheet ordering
and no MOQ for easier evaluation and prototyping.
Q. What applications is circular polarizer film used for?
A. Typical uses include polarizing 3D systems, strain inspection, display optical control,
machine vision, imaging optics, and anti-reflection related assemblies.
See also: Linear Polarizer Film
