Top

  • Polarizer film
  • Polarizer 3D Glass
  • AR and AGAR film
  • AR/AGAR film sheet type
  • AR film roll type
  • AR film roll type
  • AR/AGAR film sheet type low tack
  • AR acrylic cast type
  • AR acrylic extrude type
  • AR acrylic cast type
  • how to apply AR film
  • AR film mechanism
  • cold filter adhesive film
  • inquiry form
  • order form


  AR (Anti-Reflective) Film - Sheet Type


 Permanent adhesive▼ Low-tack adhesive ▼ 


Got claims from neighbors for light
reflection off of your large window ?
Unable to see through inside the
show window at certain time of the day ? 
In such cases, AR film is perfect solution.
Apply AR Film on both side of window and eliminate the reflection donw to one-tenth !




 MTAR - AR (anti-reflective) Film - Permanent Adhesive Type


t = 74 μm
(with no protective layer)
 Data Sheet
How to apply
How AR works

Item Code Size Unit Price
MTAR-1 1000 x 485 mm
(effective area 980 x 480 mm)
convert
to inches
$ 156
MTAR-3 485 x 330 mm
(effective area 480 x 325 mm)
convert
to inches
$ 55
* Small free sample piece available. Please use Inquire form for request.
* Bulk price available for more than 10 unit order




 JAR - AR (anti-reflective) Film - Low-tack Adhesive Type


With low-tack silicone adhesive,
it can easily be removed and reapplied.
 Data Sheet
How to apply
How AR works

Item Code Size Unit Price
JAR-1 1000 x 485 mm
(effective area 980 x 480 mm)
convert
to inches
$ 180
JAR-3 485 x 330 mm
(effective area 480 x 325 mm)
convert
to inches
$ 63
* Small free sample piece available. Please use Inquire form for request.
* Bulk price available for more than 10 unit order





★ Apply AR film on both sides for full effect
Light reflects both on the front and the reverse side of glass surface.
Reflections are approx 4-5% for each side, and total reflection sum up to approx 10%.
AR film reduces reflection down to approx 0.5% on each side and therefore applying
film on both side would reduce total reflection down to less than 1% (1/10). 
* Applying on only one side leaves out 5.5% reflection and so please apply on both side.
Front reflect Back reflect Total reflect
No AR film 5.0 % + 5.0 % = 10.0 %
AR film on front only 0.5 % + 5.0 % = 5.5 %
AR film on both side 0.5 % + 0.5 % = 1.0 %
Notice : Multi-layered glass (double/triple glazing glass) requires film to be applied on every surface. For instances, double glazing glass requires AR film to be applied on all 4 surfaces.
It is not practical and we do not recommend using AR film on these glass