• Polarizer film
  • Polarizer 3D Glass
  • AR and AGAR film
  • cold filter adhesive film
  • Cold fiter IR cut filter
  • adhesive film
  • inquiry form
  • order form


@@MPD62@-@Adhesive Film


Whereas regular adhesive film that contain base in the middle interferes with optical
performance of Polarizer, 1/4 ƒΙ film, etc, MPD62 is composed only with adhesive layer
(with no base film), and therefore it works perfectly together without impeding functionality
of these films. With its excellent transparency, transmittance and durability, adhesive film
MPD62 is suited for such purpose as applying various optical films to flat display surfaces.

‘ MPD62

@‘@Product Features

‘ Excellent transparency. 
‘ High durable. Prevent film to turn yellow under heating/humidification
‘ Ideal for laminating optical performance films to glass.
‘ Dose not interfere with polarization/phase of an optical film.

@‘@Example Usage

‘ Lamination and compounding of optical performance films with Plasma Display Panel (PDP ) 
‘ Lamination and compounding of optical performance films with various Flat Panel Displays 

@‘@Price

  ** MPD62 is Roll type product
width 620mm - Thickness 0.025mm
Composed only with adhesive layer
with no base film.

Item Code   Size    Unit Price 
MCS62-Roll Width 620mm
t=0.025mm
@1 - 9 m $33/m
@10 - 29 m $30/m
@30 - m $27/m


@‘@Specification


Specification - MPD62
‘@Size
Width mm 620 
Length m 100 
Thickness mm 0.025 
‘@Optical Performance 
@@Total light transmission rate 92.2% * (> 99) 
@@Hayes 0.5% 
@@Durability @RT x 500h
@88Ž x 500h
@60Ž x 93%RH x 500h
@-18Ž x 500h
no peeling off
no yellowish discoloration 
@* Measurement condition : MPD62 is applied to glass with seperator removed from both side
@@(Glass total light transmission rate : 92.6% / Hase 0.04%)
‘@Adhesive force
  Item MPD62
Against Glass adhesive force
(Unit N/25)
 
RT x 30min 15.5
23Ž x 65% x 24h 18.5
Separator adhesive force Light release side 0.05
Heavy release side 0.08
* Release angle : 180Ž, Release speed : 300mm/min
Adhesive force, durability and separator release force (heavy side only) measurement condition :
MPD62 is applied to high transmittance PET film (100ƒΚm) with light release side removed.
šSafety Notice
Values here are measured and example value, and not guaranteed value, nor in any way would it endorse
compatibility with any example usage stated in this page. Please perform compatibility test of MPD62
and target material before planning to implement it to any system, equipment, machines.
šImportant Notice
Please use Cast-Type Acrylic when laminating polarizer and lambda film to acrylic. Cast-Type Acrylic does not interfere with the film's optical performance. Extrusion type acrylic or PET interfere with optical performances and therefore can not be used.
› Base layer suited for lamination  Λ Glass / Cast-acrylic / Cast-polycarbonate / TAC plastic 
~ Base layer interferes with optical films  Λ Extrusion acrylic / Extrusion-polycarbonate / PET etc