• Polarizer film
  • Polarizer 3D Glass
  • AR and AGAR film
  • AR/AGAR film sheet type
  • AR film roll type
  • AR/AGAR film sheet type low tack
  • AR acrylic cast type
  • AR acrylic extrude type
  • how to apply AR film
  • AR film mechanism
  • cold filter adhesive film
  • inquiry form
  • order form


@@AR Acrylic@-@Cast Type


‘ ARAC --- AR (anti-reflection) Coated Acrylic
Cast-Acrylic with multi-layered AR coating. Optical performance matches even to glass with high planarity/
transmittance . It can be utilized for display/show case, picture frame or any AR purposes. Unlike AG (anti-glare) which diffuses reflection, AR (anti-reflection) eliminate reflection itself, enable you to see objects/image behind
the acrylic with more clarity
š Has been adapted as a surveillance monitors case for Japanese railway platforms.

@‘ Spec & Price

  Cast-Acrylic type
(Standard Type)

Cast type can be used with optical films
such as polarizer and lambda films


  Caustion for outdoor use
  How AR works 
 

Item Code   Size  Water repellent  Unit Price 
ARAC500 500 x 385 mm | t = 2mm
(effective area 486 x 371 mm)
one side  $147
ARAC380 380 x 310 mm | t = 2mm
(effective area 366 x 296 mm)
one side   $85
ARAC1003  970 x 570 mm | t = 3 mm
(effective area 940 x 540 mm)
both side  $513
ARAC603  570 x 485 mm | t = 3 mm
(effective area 540 x 470 mm)
both side  $280
* ARAC500/380 Small sample piece available upon request. Please inquire for more information 
 

š Inquire for bulk price for more that 10 unit order 

AR Acrylic (standard type) Spec and Inspection Standard
@Optical
@Characteristic

*it is actual measurement data, not guaranteed date
@Standard Value
- bottom value : Less than 0.5%
 measuring method : One side coated (reverse side is pre-painted black)
measured by monitor.
@Visual inspection With 15W-20W fluorescence light with background in black
@Damage
@Foreign material
@Pinhole
@Bubble
Size (mm square) allowance
more than 0.3 (approx ƒΣ0.62)
less than 0.3 (approx ƒΣ0.62)
no such
N/A
** Defect size is core size
@Burn/Dirt Allowed if not visible with ceiling light
@Fingerprint mark No such
@Interference clr Purple to Violet blue
Membrane Standard
@Adhesion
yCross-hatch, tape-peeling methodz
 Method F Separate 3 time with Nichiban (#405), a grid is about 1mm x 100
 Judging Criteria F Approved if there is no separation
@Membrane
@hardness
ySteel-wool methodz
 Method F Rub No.0000 steel-wool 5 time both way with 1.5kg weight.
 Judging Criteria F Approved if damage line is less than 30.
@Water repellent
@Characteristic
 Method F hydrophobic on repellent sidem, when distilled water is dropped

*Deficit detection method according to gDirt comparison charth
issued by Ministry of Finance in Japan






  Cast-Acrylic type
(High Grade Type)

Cast type can be used with optical films
such as polarizer and lambda films


  Caustion for outdoor use
  How AR works 

Item Code   Size  Water repellent  Unit Price 
ARAC503T 500 x 385 mm | t = 3mm
(effective area 486 x 371 mm)
one side  $176
* Small sample piece available upon request. Please inquire for more information 
 

š Inquire for bulk price for more that 10 unit order 





AR Acrylic (high grade type) Spec and Inspection Standard 
@Size  @500~385mm / t=3mm 
@Effective area @486~371mm
@Contact surface @Measured of Contact angle of distilled water 108‹
@Scratch resistance @No.0000 steel-wool, 5 time both way with 1.5kg wt. damage should be less than 20
@Durability @heat-resis 80Ž ~ 48 0h Test OK
@moisture-resis 60Ž ~ 90 %RH%RH ~ 48 0h
@hot water-resis 60Ž ~ 48 0h
@salt water-resis Salt spray (JIS Z2371)25 days
@light-resis xenon light / 900h
@adhesiveness cross hatch test x 3
@pencil hardness JIS K-5400  4H


  Easy to cut with an acrylic cutter
Dig groove with acrylic cutter.
When groove depth reaches 1/3 deep,
fold and cut using desk edge.
For Instruction